Table of Contents
- 1 How can construction fires be prevented?
- 2 What do you do in case of a fire on a construction site?
- 3 What are the 4 common causes of fires on a construction site?
- 4 What is an example of a way to avoid fire risks in the first place?
- 5 What are the two common fire risks on a construction site?
- 6 What are 4 things a fire safety plan should include?
- 7 What are the 3 things needed for fire?
- 8 What are the 4 types of fire?
- 9 When to talk about fire prevention on a construction site?
- 10 When to stop hot work at a construction site?
How can construction fires be prevented?
Here are our 13 top tips for fire prevention on site:
- No fires. The first rule of fire prevention, don’t start a fire!
- Keep the site clear. One of the things a fire needs to ignite and grow is fuel.
- Plan for waste.
- Safe electrics.
- Check the compound.
- Beware of heaters.
- and Lights!
- No smoking.
What do you do in case of a fire on a construction site?
Immediately pull the nearest fire alarm pull station as you exit the building. When evacuating the building, be sure to feel doors for heat before opening them to be sure there is no fire danger on the other side. If there is smoke in the air, stay low to the ground, especially your head, to reduce inhalation exposure.
What are the 4 common causes of fires on a construction site?
The following highlights common causes of construction fires and suggestions of how to address them.
- Onsite Cooking. According to NFPA, cooking equipment catching fire is responsible for 27% of construction fires—more than any other cause.
- Hot Work.
- Flammable Material.
- Incomplete Fire Protection.
Are fires allowed on construction sites?
CDM Regulation 29 requires that “Suitable and sufficient steps must be taken to prevent, so far as is reasonably practicable, the risk of injury to a person during the carrying out of construction work arising from – (a) fire or explosion; (b) flooding; or (c) any substance liable to cause asphyxiation.” CDM Regulation …
What are two common fire risks on construction sites?
A few examples of these areas of immense heat are:
- Lighting (Hot lighting and Halogen lights)
- Machinery & Tools (Grinding, Welding, Faulty Electrical Equipment)
- Naked Flames.
- Cigarettes and Lighters.
What is an example of a way to avoid fire risks in the first place?
Make sure all of your fire protection equipment (ie fire extinguishers, control panels, etc.) are easily accessible. Also don’t block the fire sprinklers or fire alarms with anything, such as dust, debris or paint.
What are the two common fire risks on a construction site?
What are 4 things a fire safety plan should include?
Instructions for building occupants and staff on fire prevention methods and what to do in case of fire. The method of training supervisory staff for fire emergencies. The method and frequency of conducting fire drills. The control of fire hazards throughout the building.
What are the most common fire risks on construction sites?
Fire Risks During Construction
- Hot work. Hot work operations pose a significant risk because they can introduce ignition sources into many areas of the work site.
- Temporary heaters.
- Flammable and combustible materials.
- Temporary electrical and lighting.
- Rechargeable-lithium ion batteries.
What should you never use to put out an electrical fire?
Don’t use water to put it out. Water is a natural conductor of electricity and if you throw water on an electrical fire, you can get shocked or electrocuted. Also, water may enable to fire to spread by conducting electricity throughout the room and potentially igniting flammable materials.
What are the 3 things needed for fire?
Oxygen, heat, and fuel are frequently referred to as the “fire triangle.” Add in the fourth element, the chemical reaction, and you actually have a fire “tetrahedron.” The important thing to remember is: take any of these four things away, and you will not have a fire or the fire will be extinguished.
What are the 4 types of fire?
Types of Fires
- Class A Fires. involve common combustibles such as wood, paper, cloth, rubber, trash and plastics.
- Class B Fires. involve flammable liquids, solvents, oil, gasoline, paints, lacquers and other oil-based products.
- Class C Fires.
- Class D Fires.
- Class K Fires.
When to talk about fire prevention on a construction site?
For example, if waste materials are piling up on the site or blocking escape routes. Regularly talking about fire safety and prevention helps to raise awareness with your team and increased compliance with the fire prevention rules on your site.
What should be the first rule of fire prevention?
The first rule of fire prevention, don’t start a fire! This is a really simple tip, but even small fires that are started to get rid of construction waste or keep workers warm can easily get out of hand. Never attempt to dispose of rubbish by burning it. Site ‘bonfires’ are forbidden as they can get out of control easily.
What makes a construction site a fire hazard?
Construction sites are at an amplified hazard of fire owing to a range of factors. The presence of combustible waste materials, solvents, hot works processes and unfinished electrical systems. There is also amplified risk of destruction, trespass and malicious acts.
When to stop hot work at a construction site?
Stop hot work at least 1 hour before the end of the shift, with fire checks at 30-minute interludes and up to and as well as 1 hour after the conclusion of the work. Always have suitable fire extinguishers readily to hand and a fire and emergency plan in place.