Can I put a hitch on my Mitsubishi Outlander?

Can I put a hitch on my Mitsubishi Outlander?

Best Trailer Hitch Recommendation for 2020 Mitsubishi Outlander I have a couple of great hitches available! Trailer Hitch, Ball, and Wiring Recommendations for a 2004 Mitsubishi Outlander The only hitches available for the 2004 Mitsubishi Outlander are Class I and Class II trailer hitches.

How much does it cost to install a tow package on a truck?

You can expect hitch installation to start around $100 and go up to $800. Keep in mind, that you’ll also have to buy the tow hitch and other parts separately (which can easily run you another $150–$200).

How hard is it to install a tow package?

Installing a trailer hitch is a relatively easy automotive job. A typical tow hitch installation may involve some of the following steps: removing the spare tire, lowering the exhaust, removing existing vehicle hardware, lifting the hitch into position and torqueing the hitch hardware to the correct values.

What weight can a Mitsubishi Outlander pull?

3,500 lbs.
Since most models of the Mitsubishi Outlander can tow up to 3,500 lbs.

Is the Mitsubishi Outlander a good towing car?

As a tow car, though, the Outlander has its limitations. The 1500kg towing weight is less than the 85% match figure, so the Mitsubishi can’t tow as much as you’d expect for a car of this size and weight. In a straight line, stability is good but without the solid, unshakeable feel of the very best tow cars.

How much does it cost for a tow package?

Dealerships will generally quote around $1,200 and upwards for an OEM kit that includes the hitch, transmission cooler, wiring, and the labor costs.

Do I need wiring for a hitch?

The trailer hitch will allow you to tow a trailer but you will need a separate wiring harness to power the lights on the trailer. This is what you will find on small trailers that do not have electric brakes but do have brake lights, running lights, and turn signals.

How much can a 2020 Outlander tow?

1,500 to 3,500 lbs
2020 Mitsubishi Outlander/Towing capacity

How much can a 2019 Mitsubishi Outlander tow?

2019 Mitsubishi Outlander/Towing capacity

What’s the best way to install a tow hitch?

A typical tow hitch installation may involve some of the following steps: removing the spare tire, lowering the exhaust, removing existing vehicle hardware, lifting the hitch into position and torqueing the hitch hardware to the correct values.

Do you need a draw bar for a trailer hitch?

Do It Right: Lifted vehicles will need a draw bar with a larger drop. It’s EXTREMELY important that the trailer be level with the hitch for towing. Unscrew the nut and remove the lock washer from the ball. Pass the threaded end through the top of the ball mount.

Do you need a ball to install a trailer hitch?

Do It Right: It can be difficult to install the ball and tighten the nut, because these parts may require tool sizes larger than what you might have in your garage. So, there are ball mounts available that have the hitch ball already installed and torqued to specification. These kits may also include the draw pin and clip for a complete solution.

Where do you put the pin on a trailer hitch?

Insert the end of the ball mount into the receiver on your hitch, and line up the hole for the pin. Insert the pin through the hole. Pass the retaining clip through the hole in the pin.