Menu Close

Where is the DLC located on OBD2?

Admin

Where is the DLC located on OBD2?

The OBD II DLC is usually located under the instrument panel on the driver side, though there are several exceptions. The OBD-II connector is required to be within 2 feet of the steering wheel (unless an exemption is applied for by the manufacturer, in which case it is still somewhere within reach of the driver).

Where is the diagnostic port on a 2007 Hyundai Elantra?

OBD connector location for Hyundai Elantra HD (2006 – 2011)

  1. The OBD II socket is located above the pedals.
  2. The OBD connector is above the pedals.
  3. Here is the OBD port.

Where do I plug in my Hyundai code reader?

OBD connector location for Hyundai Sonata (LF) (2014 – 2019)

  1. The OBD II socket is located on the left of the steering wheel.
  2. Remove the plastic cover under the open hood lever.
  3. OBD plug is here.

Where is the OBD2 port on a 2006 Hyundai Elantra?

You will find below several pictures which will help you find your OBD connector in your car.

  1. The OBD2 port is located under the steering wheel.
  2. The socket is above the pedals.
  3. You can see the plug above the brake pedal.

What does OBD stand for?

On-Board Diagnostics
OBD stands for On-Board Diagnostics and is a computer system inside of a vehicle that tracks and regulates a car’s performance. The computer system collects information from the network of sensors inside the vehicle, which the system can then use to regulate car systems or alert the user to problems.

What is KWP2000 code?

KWP2000 (Keyword Protocol 2000) is not a trouble code but rather is the name given to a type of communications protocol that is used for on-board vehicle diagnostics systems. Auto diagnostic tools and programmers use Keyword Protocol 2000 to read and transfer data to your vehicle’s electronic control unit, or ECU.

Is there a fuse for the OBD port?

Usually there is a fuse for the OBD port, if you cannot find they the fuse for the cigarette lighter and the auxiliary ports. The most common reason for getting no OBD code is simply a blown fuse. Check your fuses to see if any have gone bad. Remember that your car or truck might have more than one fuse box.

Where is car OBD port?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 – 3 in the diagram below).

What is an OBD lock?

Physical OBD locks cover the port itself, typically encasing it with solid metal. These do not stop the OBD port from working, but stop thieves simply plugging devices into them. Electronic OBD locks are more advanced, and work with the standard engine immobiliser.

Where is the OBD port on a 2005 Hyundai Elantra?

The OBD II port in a 2005 Hyundai Elantra can be found above the pedals in the driver’s footwell area. This is the port that You will need to connect an OBD II scan tool to if You want to read the codes that are stored in the ECU. TH OBD II port is on every vehicle that has been made after 1996.

What year did OBD2 start?

1996
OBDII included a series of standardized diagnostic trouble codes (DTCs). 1996 — OBD-II becomes mandatory for all cars manufactured in the United States.

What year did OBD 3 start?

Contact us if you have any questions 🙂 Mike here with ScannerAnswers – today we’re talking about the history of OBD2 and answering the question, “when did OBD2 start?” OBD2 (On-Board Diagnostics) started in the year 1996 and became a standard on vehicles produced until today (it’s 2019 when I’m writing this).