What would cause my low beam headlights not to work?
The likely cause is a fuse, headlight relay, headlight switch, dimmer switch or a wiring fault. About the only cause that is an easy fix is a blown fuse. Consult your owner’s manual to locate the main fuse for the headlight circuit and replace that fuse with one having the same amp rating.
Why is my new headlight not working?
Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. The cause: A burned out bulb, or a problem with the high beam switch or relay. The fix: Replace the bulb, switch, or relay.
Why are my low beam headlights not working?
If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams.
What causes a headlight to stop working in a car?
All the electrical systems in your car, including the headlights, are protected with fuses. These are designed to ‘blow’ and break the circuit if too much power comes through them. This protects all the components on the circuit. If a headlight fuse blows, it could cause the headlights to stop working.
Why do headlight bulbs have two filaments?
Most modern headlight bulbs have two filaments in the same glass enclosure: one for low beams, one for high beams. I imagine that you use low beams most of the time, so the corresponding filament burned out sooner. If you have this problem only with one headlight, I believe this is the reason.
What to do if your low beams don’t work?
Either way, if your low beams aren’t working but your high beams are, the first things we check are the bulbs. If you’re thinking of replacing the headlight bulbs yourself, make sure you’re familiar with the correct installation procedure for the type of bulb you’re replacing.