Table of Contents
What is the function of the stitch regulator?
A stitch regulator is a tiny computer attached to a sewing machine that constantly adjusts the machine’s stitch speed to accommodate the speed of the fabric during free-motion stitching. This ensures balanced, equal-length stitches.
What are the functions of the parts of the sewing machine?
Functions of Sewing Machine Parts
- Spool Holder. The main function of the spool holder is to control the thread direction and hold the spool.
- Bobbin. The bobbin is a small spindle that is wound with thread.
- Bobbin Case.
- Thread Guide.
- Tension Regulator.
- Thread Take Up Lever.
- Pressure Bar Lifter.
- Stitch Length Regulator.
What is a bobbin and what does it do?
A bobbin is the part of a sewing machine on which the lower thread is wound. The machine makes a stitch by catching the bottom thread, from the bobbin, with the top thread, from the needle.
Do I need a stitch regulator?
Stitch regulators are great for quilters who quilt infrequently and haven’t developed their own timing. If you have one, give it a try! But also try quilting without it, you might find it holds you back or throws off your internal timing.
How do I get my presser foot to go down?
How to adjust the presser foot pressure
- Lower the presser foot lever to lower the presser foot.
- Turn the presser foot pressure dial at the back of the machine to adjust the pressure of the presser foot.
- When you are finished sewing, reset the dial to 3 (standard).
What is the function of thread take-up?
The take-up lever is located directly above the presser foot of a sewing machine. It’s the part of the machine that pulls the thread from the spool to feed it through the machine and lifts the thread back up out of the cloth after a stitch has been made. Simply put, it’s the part that goes “up and down” as you sew.