Menu Close

What is the BSI on a Citroen C3?

What is the BSI on a Citroen C3?

The BSI is the Body Control unit (ECU) and the fuse box in the glovebox of the Citroen C3. The BSI controls many of the electrical functions and often arbitrates between the switches and the devices they operate.

How do you reset the BSI on a Citroen C3?

Citroen C3 BSI Reset

  1. Put the driver’s window down, lift the bonnet and ensure all equipment is switched off.
  2. Ensure all doors are closed and remove key from the ignition.
  3. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
  4. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).

What is a Citroen BSI unit?

Citroen BSI (Body control) failure These units are own unit rebuilds which removes the need for coding. Before sending the unit try the BSI Reset procedure as this may cure your faults: Put the driver’s window down, lift the bonnet and ensure all equipment is switched off.

How do I fix the central locking on my Citroen C3?

Re: C3 ’54 central locking problem

  1. Switch off the ignition and take out the key.
  2. Wait 1 minute without pressing the buttons of any remote control.
  3. Place the key of the high frequency remote control to be synchronised in position “ignition+”
  4. Within 10 seconds, press the locking button for 5 seconds.

How do I get my Citroen C3 out of ECO mode?

Eco mode is deactivatable by a button on the dashboard of your Citroen C3 or if you press hard on the accelerator pedal because you will be able to drive normally without this mode.

How do you reset a Citroen C3?

If the drain indicator is still on, perform the procedure below:

  1. Switch on in your Citroen C3 but without starting the engine in the same way as before.
  2. Press as much as possible on the accelerator pedal.
  3. Then press 3 times on the brake pedal.
  4. Remove the ignition.
  5. Turn on the contact for restart your vehicle.

How do I reset my BSI?

Peugeot BSi reboot procedure

  1. Disconnect the diagnostic tool.
  2. Put the driver’s window down, lift the bonnet and ensure all.
  3. Ensure all doors are closed and remove key from the.
  4. Wait for 3 minutes, disconnect the vehicle battery and wait.
  5. Reconnect the vehicle battery, wait a further 10 seconds (do.

What does the BSI control?

The BSI unit is basically a computer which. handles a multitude of functions such as. odometer value, central locking, lights and. immobiliser.

What is BSI reset on a car?

The BSI unit is basically a computer which handles a multitude of functions such as odometer value, central locking, lights and immobiliser. Some later BSI units are liable to corrupt their own software program if not “woken up” in a specific way after programming keys or battery disconnection.

How do I reset my central locking on my car?

Press and hold the “lock” button on your car remote for one second, then put the key into the ignition, and turn it on. The lights should be turned off if the key is turned to “Off”.

What does economy mode mean on a Citroen C3?

ECONOMY MODE ACTIVE’ is the C3 system to limit the battery drain. As soon as the engine is started again, ECO MODE will clear. If the engine fails to start, then you have an immobiliser, starter or engine fault and not a eco mode fault.

What to do if your Citroen has BSI failure?

These units are own unit rebuilds which removes the need for coding. Before sending the unit try the BSI Reset procedure as this may cure your faults: Put the driver’s window down, lift the bonnet and ensure all equipment is switched off. Ensure all doors are closed and remove key from the ignition.

How to reset the BSI on a Peugeot 307?

Switch on the ignition and check system’s functionality. Hold lock button on key down for 10 seconds. Remove key open & close door test central locking system. Start the engine and complete the system’s check. Failure to follow this procedure could result in incorrect operation of many BSI related items.

How to start a Citroen Xsara Picasso car?

Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.). Switch on the side lights through the driver’s window.