Table of Contents
How can I get vats without a key?
How to find vats resistance without key?
- Use a multimeter to measure the Ohms value of the thin strip of metal on the plastic oval on the keyblade of your key.
- Choose the Resistor that most closely matches the Kilo-Ohms value of your key’s chip.
How do I disable my GM security system?
How to Disable a GM PassLock System
- Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
- Look at the dashboard and locate the theft system light.
- Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.
How do I reprogram my VATS system?
GM VATs Relearn
- Insert a master key (black head) into the ignition switch.
- Turn key to the “ON” position without starting the engine.
- Wait for 10 minutes or until the security light turns off.
- Turn key to the “OFF” position for 5 seconds.
- Turn key to the “ON” position without starting the engine.
How do I get a VATS code?
How to get the VATS Pellet Number on your Key
- Turn the dial to the Ohms section in the 2K setting.
- Grab the black and red probes and make contact with each side of the black VATS pellet.
- Record the reading the multimeter reads and write it down.
- Compare your reading to this chart to learn your VATS pellet number!
Does a VATS key need to be programmed?
This type of key is a VATS key and therefore no programming is needed. However, since there is an actual chip in the key and there are 15 different options, you will need to know the exact type of key to order the right one. In case you do know, you can order it online and ask a locksmith to cut it for you.
What are vats on an LS?
some of that. VATS stands for Vehicle Anti-Theft System.
What are ECU vats?
Well-Known Member. Vehicle Anti Theft System. It’s a signal between the BCM and ECU that validates the key fob and tells the ECU to start the engine when you turn the ignition.
What triggers theft deterrent system?
The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) Charging alarm (electric vehicles only)
How does the VATS system work?
VATS keys are essentially the first electronic keys and, as such, provide a much-needed improvement in vehicle safety from their predecessors. VATS keys have resistors embedded in them, and when someone inserts a VATS key into the ignition of their vehicle, an electrical current runs through the resistor inside.
When do you need a VATS bypass module?
Vats bypass module is intended for use when installing a GM engine equipped with the PASSkey I or II VATS (Vehicle Anti Theft System) into a vehicle missing the BCM (Body Control Module), or for remote start system.
How to bypass vats, Passkey and PassLock security systems in GM?
It can be VATS, Passkey or Passlock anti theft system that is going bad causing your issue. I am going to share a secrete with you on how you can bypass these systems with very little effort. This is a really unique security system bypass kit that you can use to override your current factory theft system on your GM vehicle.
Is there a way to bypass the factory security system?
If you don’t want to bypass the factory security system but rather fix it the right way, click here to speak with a mechanic. Here is a list of GM vehicles that have VATS, Passkey or Passlock security system built in from the factory.
How to bypass factory theft on a GM vehicle?
This is a really unique security system bypass kit that you can use to override your current factory theft system on your GM vehicle. You can get this kit from New Rockies.com . I came across this site surfing the net when I was having a similar issue on a GM vehicle.