Menu Close

How to reset admin password on speco dvr?

Admin

How to reset admin password on speco dvr?

Please enter the user name for the account for which you have lost the password. If you have forgotten your user name, you will need to contact Speco at 1-800-541-5415, 1-847-678-424 or Email Speco. We will get back to you during our regular business hours to help you recover your account.

What is the default password of DVR?

What are the default passwords for my DVR or NVR? The default passwords for your DVR or NVR are the same as the username.

What do I do if I forgot my DVR password?

Here are the ways you can recover from a lost password.

  1. Use the DVR factory default password.
  2. Use a DVR password generator.
  3. Update the firmware and reset the DVR.
  4. Reset the DVR by removing the battery.
  5. DVR physical reset with jumpers.
  6. Delete the password file by using telnet.

What is IP camera activation password?

In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. 0 and above before connecting to the network need to “activate” because they come from the factory without password (not active).

Why does my Hiseeu camera not work?

Please check if the white antenna on the camera is loose first. 1)Cover the sensor under lens on the camera to see if the light is lit or not. If it’s bright, it means camera is not bad. If it’s not lit,You can connect the power of a good camera to the bad camera.

How do I find my IP camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I access my DVR over the internet?

Getting Started

  1. Make sure that your Modem is connected to the internet.
  2. Connect your modem to the internet port on your router.
  3. Connect your DVR to one of the data ports of your router.
  4. Connect your DVR to your monitor.

How do I reset my DVR?

How to Reset a DVR

  1. Turn off your television.
  2. Remove the power cable that supplies electricity to your DVR box.
  3. Leave the unit unplugged for at least a full minute.
  4. Insert the power cable back into your DVR.
  5. Tip. Some DVR brands, such as TiVo, also provide a menu-driven method for resetting the device.

What is the default admin password for HIKVision DVR?

12345
Surveillance Brands – Default Username and Passwords

Brand User Name Password
HIKVision admin 12345
Honeywell administrator 1234
IOImage admin admin
IPX-DDK root Admin or admin

How do I upgrade my Speco voice recorder?

There are two ways to upgrade the recorder. The first step is downloading the current firmware from the Speco Tech website. Download the firmware to the USB flash, then go to the setup menu, go to system, click upgrade. You can upgrade via the web browser. For the step by step guide click here.

Do you need port 9000 for Speco access?

Yes, the Speco Access mobile app needs to have port 9000 forwarded in the router for you to access the doors remotely. How to do email setup for the HU,NU,VT,VX,HT,HS?

How can I view my Speco camera recorder?

You can view the recorders with the internet explorer web browser. You can also see the recorder with SecureGuard VMS and CMS software. With the VT and NS series, you can also view the recorder with Speco Tech Multi-Client software. How to log into IP cameras?

What are the ports forwarded in a Speco router?

The ports that need to be forwarded in the router depends on the recorder model. Speco Player app uses the Network video port and web port forwarded. (default network video port is 5445 and default webport 80) Speco Blue you would need the HTTP port forwarded (default webport is 80) Speco Gray P2P or Port 9000. Speco One Port 37777.