Table of Contents
How much oil does my Nissan Quest take?
Engine Oil
Viscosity: | 0W-20, 5W-30 (All TEMPS) SAE 0W-20 is preferred. |
---|---|
Capacity: | 4.9 quarts (with filter)After refill check oil level. |
Torque: | 25 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. |
How much oil does a 1993 Nissan Altima take?
SAE 5W-30 is preferred. Capacity: 4.1 quarts (with filter)After refill check oil level.
How much oil does a 2000 Nissan Quest take?
4 quarts
Engine Oil SAE 5W-30 is preferred. Capacity: 4 quarts (with filter)After refill check oil level.
What type of oil does a 2011 Nissan Quest take?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-30 5 Quart.
How much oil does a 2008 Nissan Quest take?
4.2 quarts
Capacity: 4.2 quarts (with filter)After refill check oil level.
How many quarts of oil does a 97 Nissan Altima take?
4.1 quarts
Engine Oil SAE 5W-30 is preferred. Capacity: 4.1 quarts (with filter)After refill check oil level.
How much oil does a 2001 Nissan Quest take?
Model: Nissan Quest, V41 (1998 – 2003) (USA)
Engine | Capacity/Filter | |
---|---|---|
Quest 3.3 (1999 – 2003) | VG33E | 3.8 l 4.02 US Quarts / Filter: 0.2 l 0.21 US Quarts |
What type of oil goes in a 2004 Nissan Quest?
Engine Oil
Viscosity: | 10W-30, 10W-40 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
---|---|
Capacity: | 4.2 quarts (with filter)After refill check oil level. |
Torque: | 25 ft/lbs (Oil Drain Plug) |
How much oil does a Nissan Quest take?
Then Here you can see all information about Nissan Quest engine oil capacity, Oil change Intervals, and Service Cost. How many quarts/liters take Nissan Quest engine oil capacity for all models and variants.
How much refrigerant does a Nissan Xterra have?
Nissan refrigerant and oil capacity charts Year Model Refrigerant Refrigerant Oil TITAN 2004 All Engines R134a 24.7 – 26.5 PAG 100 XTERRA 2000-2004 All Engines R134a 25.00 PAG 100
What kind of Oil can you put in a Dodge truck?
If your vehicle was originally charged with R12 refrigerant, for example, the oil type specified, ‘mineral’, will not apply. Additionally, General Motors issues Bulletin # 02-01-39-004B replacing PAG 150 oil with a lower viscocity oil.