How wide a tire can you go on stock Wrangler Rubicon wheels?

How wide a tire can you go on stock Wrangler Rubicon wheels?

12.5” width will work. Many people do it. However, it is not a recommended size with a 7.5” wheel. I would go with a 35 inch tire in a narrower width.

What size are factory Rubicon tires?

However, generally speaking, when it comes to the standard factory size, the Wrangler come with 15″-17″ tires. The first set of numbers (255) refers to the tire width in millimeters.

Will 33 tires fit stock Rubicon?

33-inch tires can be fitted to a stock Jeep Wrangler JK, but with minimum clearance on the front bumper and not enough clearance for full articulation off-road.

What is the biggest tire I can put on a stock Jeep Wrangler?

The biggest diameter tire you can fit on a Jeep Wrangler with a stock suspension is 33 inches. The common 33-inch tire sizes are any of the following: 285/75/16. .

Can I put bigger tires on my jeep without a lift?

You don’t have to lift to put bigger tires on. Lifting the Wrangler creates a whole set of problems. It changes the angle of your steering. Changes the angle of your drive shaft .

Can you put a 12.50 tire on a 7.5 inch rim?

most tire manufacturers recommend 295/70 as max width tire for a 7.5″ wide rim.

How big are the tires on a jeep Rubicon?

There are several Jeep Rubicon owners who fitted 315/70R17 tires and went “wheeling” disconnected with no rubbing or body scrub. Some have fitted 35/12.5R17 and rubbed off-road without disconnecting. For those interested, here is a link where they fit 37 inch tires with minimum modifications ,see below.

How big are the tires on a Jeep Wrangler?

The tire size for your Jeep Wrangler depends upon the year of manufacturer. Select the year of your Wrangler to narrow down the results. You may also view a complete tire size chart for your Jeep Wrangler below.

Is there 5.5 ” backspacing on Jeep MJ?

* 5.5″ backspacing is stock on most XJ/MJ vehicles. Backspacing should be kept as close to stock as possible on these vehicles.

What does backspacing mean on a Jeep Wrangler?

Backspacing is described as the distance from the hub mounting surface to the inside lip of the wheel (measured in inches). Increased backspacing puts the tire closer to the center of the truck. Hence a rim with a closer to 0 or negative offset will sit further out and allow you to fit wider tires.